Commercial & Industrial Fire Protection in Salt Lake City, UT
State Fire has protected commercial and industrial facilities along the Wasatch Front for more than 35 years — and Salt Lake City is home. Our headquarters and primary service branch are located at 2550 S W Temple St in South Salt Lake, which means local businesses get fast response, on-the-ground familiarity with city and county requirements, and a team that has worked in the valley’s warehouses, plants, high-rises, and mine sites for decades.
Every system we install and service is handled by our own certified technicians. From a single restaurant hood to a campus-wide fire alarm network or a clean-agent system protecting a data center, Salt Lake City facility managers rely on State Fire for code-compliant work, clear documentation, and 24/7 emergency support.
Fire Protection Services in Salt Lake City
State Fire is a single-source fire protection company. Whether you need a new system designed and installed, an existing system inspected and brought into compliance, or emergency repairs, our Salt Lake City team covers the full life-safety stack:
Fire Alarm Systems
Design, installation, inspection, testing, and 24/7 monitoring of commercial fire alarm and detection systems.
Fire Sprinkler Systems
Installation, inspection, testing, and repair of wet, dry, pre-action, and deluge systems built for Utah winters.
Fire Extinguishers
Annual inspection, service, recharge, recertification, and compliance support for portable fire extinguishers.
Hydrostatic & Cylinder Testing
Certified hydrostatic testing and recertification for not only your fire-protection cylinders, suppression tanks, and pressurized equipment but also SCUBA, paintball, medical and food and beverage cylinders.
Commercial Kitchen Fire Suppression Systems
Commercial kitchen fire suppression installation, inspections, maintenance, and repairs designed to support restaurants, food service facilities, and hood system compliance.
Kitchen Hood Cleaning
Professional kitchen exhaust hood cleaning to remove grease buildup and help restaurants and commercial kitchens stay compliant with NFPA 96 fire code and insurance requirements.
Mobile Equipment Fire Suppression
Onboard fire suppression for mining haul trucks, loaders, construction fleets, and heavy equipment in demanding environments.
Special Hazards Fire Suppression
Clean agent, CO2, foam, dry chemical, water mist, and inert gas suppression for high-value, water-sensitive assets.
Knox Box Installation & Service
Installation and service of secure Knox Box rapid-entry systems for fire department and first-responder access.
Security Systems
CCTV, access control, intrusion detection, and integrated security solutions for commercial and industrial facilities.
Built for Salt Lake City's Industries
Salt Lake City isn't a one-size-fits-all market, and neither is fire protection. The risks in a downtown office tower are nothing like those on a mine bench or in a server room. State Fire designs to the hazard:
- Mining & heavy industry — The Oquirrh Mountains on the valley's west edge host some of the most demanding industrial fire-protection work anywhere, and State Fire has deep roots in it. We protect fixed plant assets and provide onboard suppression for haul trucks, loaders, and heavy equipment, backed by our mining industry leadership.
- Data centers & technology ("Silicon Slopes") — Utah's tech corridor runs from Salt Lake County south. Water-sensitive server environments call for clean agent and water mist suppression that protects equipment without the collateral damage of a traditional sprinkler discharge.
- Manufacturing, warehousing & distribution — The I-15 and I-80 logistics corridors are packed with high-piled storage and production facilities that demand correctly designed sprinkler and detection coverage.
- Healthcare & senior living — Hospitals, clinics, and assisted-living facilities carry some of Utah's most stringent fire-code obligations; we keep alarm, sprinkler, and suppression systems inspection-ready.
- Hospitality, restaurants & retail — Hotels, resorts, and commercial kitchens across the valley rely on us for suppression, hood cleaning, alarms, and extinguisher service.
- Aviation, government & education — Airport facilities, public buildings, schools, and universities trust State Fire for integrated life-safety systems and dependable documentation.
Special Hazards Protection for High-Value Facilities
A standard sprinkler system isn't always the right answer. Data halls, electrical rooms, archives, museums, telecom shelters, and certain industrial processes can be ruined by water — or simply can't be protected by it. State Fire's Special Hazards department engineers suppression around the asset and the risk:
- Clean agent and inert gas systems for electronics and occupied spaces
- CO2 and dry chemical for industrial process hazards
- Water mist and foam for specialized applications
- Advanced detection and control and ERRCS / BDA in-building radio coverage
This is the work that sets State Fire apart from generalist providers in the Salt Lake City market.
Inspections, Testing & Code Compliance in Utah
Utah enforces the International Fire Code (IFC) and International Building Code (IBC) along with NFPA standards with state amendments — under the authority of the Utah State Fire Marshal's Office and your local AHJ (Authority Having Jurisdiction). Inspection frequency depends on the system and component type and is governed by the relevant NFPA standards — examples of this are NFPA 25 for water-based systems, NFPA 72 for fire alarms, NFPA 10 for extinguishers, and NFPA 96 for kitchen exhaust systems.
State Fire builds an inspection and testing schedule matched to your specific systems, handles the testing and any needed repairs, and delivers the documentation your AHJ and insurer expect — so nothing lapses and nothing is a surprise at inspection time.
Why Salt Lake City Businesses Choose State Fire
- Local headquarters, local crews. Our main branch is in South Salt Lake — not a national call center routing a subcontractor to your door days later.
- In-house, certified technicians. 350+ certified or licensed technicians on our own staff perform the work, start to finish.
- One source for every system. Alarms, sprinklers, suppression, special hazards, extinguishers, security, and testing under one roof and one point of contact.
- 24/7 emergency response, 365 days a year. When a system goes into trouble, we respond.
- 35+ years of Utah experience across the valley's toughest commercial and industrial environments.
- National Accounts capability for multi-site portfolios that include a Salt Lake City facility.
Licenses & Certifications
State Fire holds the licensing and affiliations Utah facility owners should expect from a qualified fire-protection contractor:
- Utah Contractor with LRF #6686678-5501
- Automatic Suppression in Multiple Municipals #H9
- Automatic Fire Suppression Servicing Concern #H104211
- Portable Fire Extinguisher Servicing Concern #E243 & #E105411
- Hood Cleaning License #K24
- Burglar Alarm #12659577-6501
Affiliations: NFPA, NAFED, SFPE, FSSA, IWMA, and multiple NICET certifications.
Our Salt Lake City Service Area
From our South Salt Lake headquarters, State Fire serves businesses throughout Salt Lake City and the surrounding Salt Lake County metro, including South Salt Lake, West Valley City, Murray, Taylorsville, West Jordan, South Jordan, Sandy, Midvale, Holladay, Millcreek, Cottonwood Heights, Draper, Magna, and the Salt Lake City International Airport area — plus the broader Wasatch Front. Need coverage beyond the metro? See all Utah locations or our full North American service area.
Salt Lake City Corporate Headquarters
2550 S W Temple St,
South Salt Lake, UT 84115
Frequently Asked Questions
Does State Fire serve all of the Salt Lake City area?
Yes. Our headquarters and primary branch are in South Salt Lake, and we serve commercial and industrial facilities throughout Salt Lake City, Salt Lake County, and the wider Wasatch Front.
What fire code does Salt Lake City follow?
Utah enforces the International Fire Code (IFC) and International Building Code (IBC) — and applicable NFPA codes with Utah state amendments — under the Utah State Fire Marshal's Office and the local Authority Having Jurisdiction, typically the Salt Lake City Fire Department.
How often do fire protection systems need to be inspected in Utah?
It depends on the system and component. A few examples of these are water-based sprinkler systems follow NFPA 25, fire alarms follow NFPA 72, portable extinguishers follow NFPA 10, and commercial kitchen systems follow NFPA 96. State Fire sets up an inspection schedule matched to your equipment and handles the testing, repairs, and documentation.
Do you offer 24/7 emergency fire protection service in Salt Lake City?
Yes. State Fire provides 24/7 emergency response, every day of the year, for commercial and industrial fire protection systems in the Salt Lake City area.
Can you protect a data center or server room without water damage risk?
Yes. For water-sensitive environments we design clean agent, inert gas, and water mist suppression systems that protect electronics and critical equipment without the collateral damage of a traditional sprinkler discharge.
Do you service fire suppression on mining and heavy equipment?
Yes. State Fire specializes in onboard fire suppression for mining, construction, and heavy-equipment fleets, in addition to fixed-plant industrial fire protection.
Are you licensed to do fire protection work in Utah?
Yes. State Fire holds Utah contractor licensing and the required servicing-concern licenses for automatic suppression, portable extinguishers, hood cleaning, and burglar alarm work, and maintains NFPA, NAFED, SFPE, FSSA, IWMA, and NICET affiliations.
Request Fire Protection Service in Salt Lake City
Whether you're planning a new build, preparing for an inspection, or dealing with an emergency, State Fire's Salt Lake City team is ready to help.